Protocol Converter for Data Exchange Between Different SIMATIC S7 Controllers
ACCON-NetLink-PRO compact enables simple and fast integration of SIMATIC S7-200/300/400 controllers into Ethernet networks. This enables programming, configuration, and SCADA applications such as STEP7, TIA Portal, WinCC or OPC Servers to access multiple automation devices robustly and cost-effectively in parallel.
The adapter can be plugged directly into the MPI connector and replaces expensive Communication Processors. The looped-through programming device socket allows retroactive piggyback mounting.
For configuration purposes, ACCON-NetLink-PRO compact can be integrated as a programming device in the familiar STEP7 or TIA Portal development tools. In addition, a web interface is available for basic settings, e.g., the PROFIBUS subscriber address or the IP address. SIMATIC S7-200/300/400 controllers without Ethernet connection can also be connected to SIMATIC S7-1200/-1500 controllers with Ethernet connection via the adapter. ACCON-NetLink-PRO compact can be supplied with power directly via the SIMATIC S7 controller or via the 24VDC connection.
Integration of S7-200, S7-300 and S7-400 into 10/100 Mbit Ethernet Networks
- Direct communication with one or several controllers in any kind of TCP network structure
- Support of up to 16 TCP simultaneous connections
- Use of standard TCP/IP for communication within plant or company networks and with the Internet
- Expansion of participants using MPI or PROFIBUS via pass-through PG port
- Interference-free integration into existing control systems
- Power supply directly from controller or via external power supply
- Cost-effective solution alternative
Programming Adapter Supporting all Relevant S7 Engineering Tools
- Interface for programming controllers via Ethernet
- Compatibility with STEP7, TIA Portal, WinCC and WinCC Flexible
- Display and configuration of the adapter in STEP7 or TIA Portal
Application Integration through RFC1006 and OPC UA
- Connection to HMI station and PLC directly via RFC1006 Ethernet protocol
- Support of OPC and OPC UA by using dataFEED OPC Suite for integration into higher-level systems, e.g. for production management
Product Information
General Information
- Supported Controllers: Siemens SIMATIC S7-200, S7-300, and S7-400
- Housing, Dimensions (W x H x D): 40 x 17 x 64 mm
- Weight: Approx. 110 g
- System Requirements: No limitation (the driver for SIMATIC NETLink-S7-NET only Windows XP, 7, 8.1, 10, 2K3 R2, 2K8 R2, 2K12 R2)
- Configuration Software: Web configuration
PC Communication Interface
- Number: 1
- Type: Ethernet 10 Base-T, Ethernet 100 Base-TX
- Connection: RJ45
- Supported Transfer Rates to PLC: 9.6 KBit/s … 12 MBit/s with automatic detection
- Supported Transfer Rates to PC: 10/100 Mbps autom. detection
- Supported Bus Systems: PROFIBUS, MPI
- Simultaneous Connections: 16 TCP/IP connections
MPI/PROFIBUS Communication Interface
- Type: RS485, isolated
- Connection: SUB-D male connector, 9-pin. with PG interface and repeater
- Transmission Rate: Max. 12 Mbps
- Status Indicator: 5 LEDs, 2 of them bicolor
- Voltage Supply: 24 VDC, 18–30 V DC
- Current Draw: Max. 200 mA with 24 VDC
- Simultaneous Connections: 32 MPI / PROFIBUS connections
Ambient conditions
- Ambient Temperature: 0 °C … +60 °C
- Transport & Storage Temperature: -20 °C … +80 °C
- Relative Air Humidity: 95% RH without condensation
- Pollution Degree: 2
- Protection rating: IP20
- Approvals: CE
CE
- RoHS: Yes
- REACH: Yes
Hardware: ACCON-NetLink-PRO compact gateway
Order number: 161701-PRO
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.