CAN/CAN FD repeater with push-in connectors and termination resistor
The Ixxat CAN/FD Repeater with two CAN/CAN FD interfaces improves the CAN bus load capacity, establishes a physical coupling of bus systems, and offers galvanic isolation. It provides the flexibility to optimise network structures and liberates them from CAN bus structure constraints for optimised operation.
Product Information
- Robust industrial use
Designed for industrial environments, meeting high demands for robustness, temperature ranges, and safety. - Flexibility in CAN FD network design
Helps to optimise CAN/CAN FD network structures by enabling extended layouts (stub lines, star and tree topologies). - Removable push-in connectors
Features removable push-in connectors, ensuring hassle-free installation and maintenance without the need for additional tools. - Fast and transparent operation
Minimal impact on real-time behaviour, equivalent to a short line length (ca. 35 m/175 ns delay). Enabling transparent transmission, compatible with all higher layer protocols. - Cost savings due to simple wiring
Optimised topologies enable simpler wiring, resulting in fewer cables and cost savings at installation and maintenance. - Enhanced network reliability
Higher system reliability by electrically isolating CAN/CAN FD segments and powering up to 5 kV DC for 1 minute. This enhances the protection of the device against damage to electronics caused by voltage peaks. - Network monitoring and fault recovery
In case of disturbances, the repeater automatically disconnects the affected segment and restores it after the fault is resolved. - Integrated bus termination resistors
Integrated bus termination resistors for each CAN channel (120 Ohm, separately switchable by piano switches) prevent reflections on the line ends and ensure optimum communication.
Certifications & Standards
- Product Certifications: CE, FCC
- Protection Class IP: IP20
General
- Net Width (mm): 108 mm
- Net Height (mm): 149 mm
- Net Depth (mm): 27 mm
- Net Weight (g): 135 g
- Packed Width (mm): 131 mm
- Packed Height (mm): 41 mm
- Packed Depth (mm): 175 mm
- Packed Weight (g): 190 g
- Mounting: DIN-rail (EN 50022 standard)
- Current Consumption Max value at Vcc nom (mA): < 1 W
- Input Voltage (V): 10-30 V DC +-0 %
- Isolation: CAN-CAN and CAN-Power – at least 5 kV DC for 1 minute; CAN shield to ground and power to ground – at least 2 kV DC for 1 minute
- Operating Temperature °C Min: -25 °C
- Operating Temperature °C Max: +70 °C
- Storage Temperature °C Min: -40 °C
- Storage Temperature °C Max: +80 °C
- Relative Humidity: 0 to 90 %, non-condensing
- Housing Materials: PC ABS, UL 94
- Packaging Material: Cardboard
- Warranty (years): 1
Identification & Status
- Item Number: 1.01.0211.20000
- Export Control Classification Number (ECCN) (Applies only to the U.S): EAR99
- Brand: Ixxat
- Predecessor: 1.01.0210.20000,1.01.0210.20200, 1.01.0210.20210, 1.01.0210.20010, 1.01.0067.44010, 1.01.0067.44300, 1.01.0067.44400
CAN Features
- CAN Mode: CAN high-speed (ISO 11898-2)
- CAN Baud Rate: 14 kBit/s to 1000 kBit/s
- CAN Transceiver: TCAN1044
CAN FD Features
- CAN FD Mode: ISO CAN FD, nonISO CAN FD
- CAN FD Baud Rate: 14 kBit/s to 8000 kBit/s
- CAN FD Transceiver: TCAN1044
Physical Features
- Connectors / Input / Output: 2 x 4-pin push-in spring connector FKC 2.5/4-ST GY (CAN), 1 x 3-pin push-in spring connector FKC 2.5/3-ST GY (power)
- Contains Battery: No
- Item number: 1.01.0211.20000
- Warranty: 1
Video
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.