owa344

CPU

• ARM Cortex A7 at 792MHz clock speed
• Yocto Project File System*
• DDR3 512MB RAM
• NAND FLASH 512MB
• Optional EMMC 8GB for additional storage
• Optional TPM 2.0

*For more information about the OS and kernel, contact us.

GNSS positioning for owa344A

• Receiver: GPS/GLONASS/GALILEO/QZSS/BDS
• 33-channel continuous tracking receiver
• SBAS: WAAS, EGNOS, MSAS, GAGAN
• Update Rate: up to 10Hz
• Accuracy: <2.5 meters CEP
• Signal Acquisition:
  • Cold Start: 32 s
  • Hot Start: < 2 s
• Sensitivity:
  • 167dbm tracking
  • 149dBm acquisition
• Active Antenna Power Supply: +3.3V

LTE CAT 1 bis with 2G fallback

• LTE-FDD bands: B1/B2/B3/B4/B5/B7/B8/B12/B13/B17/B18/B19/B20/B25/B26/B28/B66
• LTE-TDD bands: B34/B38/B39/B40/B41
• GSM/GPRS/EDGE: Quad band
• DL 10M bps, UL 5 Mbps
• GPRS multi-slot Class 12
• LTE-TDD: Max 130 Mbps (DL), Max 30 Mbps (UL)

Interfaces

owa344A

• Up to 2 CAN bus supporting full speed 1Mbps CAN 2.0B
• K-line bus
• Ethernet 10/100Base-TX
• Maxim 1-Wire
• USB Host 2.0
• 2 external RS232 ports. 6 pins:
  • 1 x (TX/RX/CTS/RTS) Console
  • 1 x (TX/RX)
• Integrated sensors: Programmable 3-axis sensor, accelerometer
• Configurable digital input/outputs:
  • 9 inputs
  • 50V max inputs (logic low <1.5V, high >3V)
  • 7 inputs function as wake signals for low-power modes
  • All inputs can be used as counters (odometer). 32bit, 3Khz max
  • 6 open collector outputs (200mA each)
  • 2 high-side switches to Vin for output (1A each)
  • Short-circuit protection for all outputs
• 4 analogue inputs:
  • 12-bit resolution, 1% accuracy
  • Multiplexed with digital I/O pins
  • 0-30V range
• Vout 5V power output (500mA max)
• FAKRA antenna connectors or internal antennas
• 4 LEDs for status indication

owa344I

• Two Ethernet 10/100Base-TX
• Up to two RS485 port
• 2 external RS232 ports. 6 pins:
  • 1 x (TX/RX/CTS/RTS) Console
  • 1 x (TX/RX)
• Maxim 1-Wire
• USB Host 2.0
• Configurable digital input/outputs:
  • 9 inputs:
    • 50V max inputs (logic low <1.5V, high >3V)
    • 7 inputs function as wake signals for low-power modes
  • All inputs can be used as counters (odometer). 32bit, 3Khz max
  • 6 open collector outputs (200mA each)
  • 2 high-side switches to Vin for output (1A each)
  • Short-circuit protection for all outputs
• 4 analogue inputs:
  • 12-bit resolution, 1% accuracy
  • Multiplexed with digital I/O pins
  • 0-30V range
• Vout 5V power output (500mA max)
• SMA antenna connector
• 4 LEDs for status indication

*Availability of features depends on models.

Power Supply

• Nominal range of 9 V to 48 V
• Typical consumption at 24 V

Temperature range:

* Industrial temperature range components -40 °C to 85 °C
** Internally limited with battery protection during discharge: -40 °C to -20 °C

Enclosure

• Environmental protection to IP40 standard
• Material: PC+ABS
• System connectors: Molex Microfit 24-way 43045-2400
• NanoSIM
• Ethernet RJ45 (owa344I=2)

owa344A

• Dimension: L=140 x W=85 x H=32 mm (With the fixing wings)
• Weight: 170 gr

owa344I

• Dimension: L=120,60 x W=85 x H=32 mm (With the DIN Rail fixing)
• Weight: 175 gr

Development Kit

• Includes: Developer’s board owa344, power supply cables, cables for interfaces, antennas, web access to developers area: cross compiler, API, libraries, manuals and application notes

Other Options

• See Variants & Options

This table is only an HTML5 version of the official BOK 000 5001 owa344 family variants & options summary, available on the documentation section of the owa344 IoT gateway.

Notes

1. Analog Inputs are multiplexed in the main connector with DIOs (DIN0/AIN0 – DIO1/AIN1 – DIO2/AIN2 – DIO3/AIN3)
2. CAN2 removes DIO2/AIN2 and DIO4. CAN2 is multiplexed with DIO2/AIN2 and DIO4
   
3. Kline and RS485 are not compatible
4. 2nd RS485 no compatible with DIO-5, Kline and 2nd RS232
5. The iButton is multiplexed with DIO6 and cannot be used simultaneously
6. Current Meter is multiplexed with High-Side 8 and 9. Not compatible
7. HART is multiplexed with DIO3/AIN3 and is not compatible with 2nd RS232 and 2nd RS485