Easily set up range-extending or bridge applications for CAN and CAN FD networks
CANnector Range and CANnector Bridge are preconfigured versions of the CANnector S device, enabling users to easily set up range-extending or bridge applications for CAN and CAN FD networks without time-consuming configuration.
Product Information
The basic range configuration of CANnector Range transmits all 6 CAN buses transparent over a longer distance via Ethernet. Two devices are required for this function (master/slave).
In addition, CANnector Range can also be used as a multiple CAN(FD) interface connected to the PC via Ethernet. This allows Ixxat VCI based or D-PDU-API applications to be connected to the field buses via a long distance. For this use case, only one CANnector Range device is required.
The CANnector Bridge can act as Bridge and Gateway. The four provided configurations initialize all 6 CAN interface with 125 kbit/s, 250 kbit/s, 500 kbit/s, or 1000 kbit/s and forward all received data as follows: CAN1 ↔ CAN2; CAN3 ↔ CAN4; CAN5 ↔ CAN6. Specific baudrate combinations can be selected easily without the need for setting up their own configuration.
The Range and Bridge functionality is executed stand-alone on the device, a PC is only needed for user-specific configurations or visualisation/stimulation of data.
Since CANnector Range/Bridge is based on the common CANnector S variant, the device functionality can easily be adapted or enhanced by using the ACT tool – providing extended range/bridge functionality or even logging.
- Up to 6 CAN buses (thereof 2 CAN FD capable)
- Supports CAN listen-only (CAN RX)
- Switch-on CAN (self switch on in case of any CAN communication or a defined message)
- Extensive filter and mapping options
- Extendable by own C-Code or Matlab/Simulink models
- Easy cloud connection
- Very low latency in classical gateway applications
- Easy access via USB, LAN, WLAN/WiFi, 4G
- Compatible with the Ixxat CAN@net Generic Ethernet protocol and CAN@net NT protocol
- Plug&Play, but also configurable/programmable
- Standalone operation
- Extended temperature range (-40 °C to 80 °C)
- Galvanic isolation
- DIN rail mountable
Preconfigured range operations
- Bridging of all 6 CAN channel via Ethernet (2 devices requires – master/slave)
- Supported CAN baudrate 250 Kbit/s
- 4 configurations supporting CAN baud rates up to 1000 kbit/s
- Permanent data transmission without trigger or filtering
Advanced features via user configuration (using ACT)
- Range extension for CAN, CAN FD and LIN data
- Signal based operation (based on imported bus description files)
- Forwarding individual messages and/or signals
- Modification of message ID and content
- Data manipulation via own C-Usercode or MATLAB/Simulink models
- Possibility to create own Messages based on signals from every CAN bus
- Export of CANdB’s in case of the creation of own messages
- Low power sleep mode and switch-on on CAN(FD)
- Parallel data storage on USB memory, PC or cloud
- Remote device management (OPC UA, HMS-HUB)
- LAN/USB/WLAN (optional WLAN module required) access for signal visualisation/stimulation
Preconfigured bridge operations
- Bridging of all 6 CAN buses
– CAN 1 to CAN 2 and vice versa
– CAN 3 to CAN 4 and vice versa
– CAN 5 to CAN 6 and vice versa - Supported CAN baudrates 125 kbit/s, 250 kbit/s, 500 kbit/s, or 1000 kbit/s –depending on selection
Advanced features via user configuration (using ACT)
- Bridging of CAN, CAN FD, EtherCAT and LIN data
- Signal based operation (based on imported bus description files)
- Forwarding individual messages and/or signals
- Modification of message ID and content
- Data manipulation via own C-Usercode or MATLAB/Simulink models
- Possibility to create own Messages based on signals from every CAN bus
- Export of CANdB’s in case of the creation of own messages
- Low power sleep mode and wake-up on CAN(FD)
- Parallel data storage on USB memory, PC or cloud
- Remote device management (OPC UA, HMS-HUB)
- LAN/USB/WLAN (optional WLAN module required) access for signal visualisation/stimulation
| Dimensions (L x W x H) | 196 x 113 x 43 mm |
| Protection class | IP40 |
| Weight | Approx. 790 g |
| Operating temperature | -40 °C to +80 °C |
| Power supply | 6-36 V DC |
| Current consumption | Typ. 420 mA at 12 V (sleep mode < 2 mA) |
| Housing material | Aluminium, stainless steel |
| Relative humidity | 10-95 %, non-condensing |
| Host system | Power PC, 256 MByte RAM, 256 MByte Flash |
| Ethernet | 10/100 MBit/s, RJ45 |
| USB | 2.0 high-speed device, USB-B 2.0 high-speed device, USB-A |
| CAN FD transceiver | Microchip MCP2562FD |
| CAN RX only | Hardware switchable |
| CAN high-speed transceiver | Texas Instruments SN65HVD251 |
| CAN bus termination resistor | High-speed/CAN-FD: none |
| LIN transceiver | NXP TJA1020 |
Product codes
| 1.01.0091.02000 | CANnector Range * |
| 1.01.0091.03000 | CANnector Bridge * |
In the box
- CANnector Range or Bridge
- Cables for Ethernet, USB
- Hardware and user manual
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.
Our expertise lies in establishing, maintaining, and leveraging plant data for business benefit. Through our innovative solutions, we work alongside you to streamline processes, enhance efficiency, and reduce costly downtime.
CONTACT US
Main: +27 (11) 548 9960
Sales: +27 (11) 548 9970
SOCIAL MEDIA
Copyright @2024 Industrial Data Xchange. All rights reserved.