Connectivity between a PROFIBUS network and a J1939 Heavy Duty vehicle (CAN) network.
EASY CONFIGURATION – NO PROGRAMMING REQUIRED!
The X-gateway appears as a PROFIBUS-DP Slave device allowing a PROFIBUS Master to read or write data from the J1939 network. HMS provides the X-gateway with a free Windows based configuration tool (BWConfig). This PC based software allows the user to map J1939 parameter (PGN) data into a range of memory addressable through the Anybus X-gateway PROFIBUS-DP interface.
Easy Configuration – No programming required!
Configuration of the X-gateway is simple using BWConfig and consists of setting up an I/O table containing selected J1939 PGNs and the rate that each will be read or written from the J1939 network. BWConfig will then automatically map the I/O table to a range of addresses accessible from the X-gateway PROFIBUS interface.
The configuration is downloaded from the PC to the Anybus X-gateway via an RS232 connection and is saved in FLASH memory.
Product Information
- Monitor and control data on a J1939 heavy duty vehicle network from PROFIBUS PLC system or device
- Typical applications: Electric Power Generation, Oil & Gas, Marine, Military, Heavy Duty Vehicles, Any Diesel Engine based system supporting J1939
- Max 500 bytes of I/O data in each direction
- Easy configuration via the included BWConfig Windows Software. No programming required
- Robust aluminum stand-alone housing
- Global free technical support and consultancy
PROFIBUS Slave settings can be made either via on-board switches, or by importing the provided .GSD file into engineering tool of the controlling PLC.
- Complete PROFIBUS-DP/DPV1 Slave functionality according to extensions of EN 50170
- Supports Class 1 & Class 2 services
- Automatic baudrate detection up to 12Mbit/s
- Max. Cyclic I/O data 244 bytes Input and 244 bytes Output, max 344 bytes total (in+out)
- Acyclic User Parameter data / Diagnostics length – up to 237 bytes
- Supports PROFIBUS features: Sync and Freeze and Watchdog
- PROFIBUS slave settings via on-board switches or vis .GSD file
- 1x D-sub 9-pin female PROFIBUS connector
- SAE J1939 network interface with a unique network address in accordance to the J1939-81 specification
- Max 496 bytes of I/O Input data and 492 bytes of I/O Output Data
- Up to 120 PGN’s monitored by Input data points
- Up to 100 PGN’s transmitted by Output data points
- Supports J1939 network baud rates of 250K and 500K
- Transmission and reception of all types of fixed-length J1939 messages, including PDU1, PDU2, broadcast and destination specific
- Monitoring of DM1 (active diagnostics) and DM2 (previously active diagnostics) messages
- Complete network address management including address claim, protection, and yield on higher priority conflict
- Network address can be self-configurable over a range of addresses
- J1939 Transport Protocol for transmission and reception of large messages (9 – 1785 bytes). Both connection based (RTS/CTS) and broadcast (BAM) are supported
- Configurable CAN bus-off reset option will reset the network interface and attempt to return to online when a CAN bus-off condition is detected
- 1x 5-pole 5.08 mm Phoenix pluggable screw connector for J1939
| Dimensions (L•W•H) | 114 x 44 x 127mm or 4,49 x 1,73 x 5,00″ |
| Weight | 400g or 0,880 lbs |
| Operating temperature | -25 to +65 °C or -13 to +149 °F |
| Storage temperature | -40 to +85 °C or -40 to +185 °F |
| Power supply | 24 VDC +/- 20% via 2-pole 5.08 mm Phoenix pluggable screw connector |
| Current consumption | max. 400mA (Typical 200mA) |
| Enclosure material | Aluminium and plastic |
| Installation position | Vertical / Flat* |
| Galvanic isolation | YES, on both BUS/Ethernet side |
| Mechanical rating | IP20, NEMA rating 1 |
| Mounting | DIN-rail (EN 50022 standard) |
| I/O configuration | via USB port with Anybus Configuration Manager software |
| Certifications | CE, CULUS, RoHS |
| Order Code | AB7615 |
|---|---|
| Included components |
Gateway Power supply not included Configuration software is available for download. |
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.
Our expertise lies in establishing, maintaining, and leveraging plant data for business benefit. Through our innovative solutions, we work alongside you to streamline processes, enhance efficiency, and reduce costly downtime.
Copyright @2024 Industrial Data Xchange.
All rights reserved.
CONTACT US
Main: +27 (11) 548 9960
Sales: +27 (11) 548 9970
SOCIAL MEDIA