Five galvanically isolated transparent repeaters (six segments)
The B5+ saves costs through the reduction of traditional PROFIBUS repeaters. This product is equipped with 5 galvanically isolated transparent repeaters on a single unit (offering 6 segments). Each segment can handle 31 devices and a cable length equal to the main bus.
To save costs on plugs and offer flexibility, it contains screw terminals as well as DB9 connectors. The DB9 connectors are also perfect measurement points for ProfiTrace to quickly measure all segments. Termination for each segment is on-board and switchable.
A reliable and robust backbone solution
For PROFIBUS network designs, the ProfiHub B5+ offers a reliable and robust backbone solution with robust message checking and selectable redundancy on communication and power supply. The extensive monitoring of messages in combination with redundancy on the communication and voltage, makes the ProfiHub the perfect access port for network components. An alarm contact is linked to events based on the status of the power supply and the bus redundancy if this is enabled. Unlimited cascading of repeaters is possible with 1200-meter spur lines.
The ProfiHub B5 is a powerful package to ensure reduced installation complexity, increased time utilisation and better deployment of project resources. The ProfiHub B5+ is used in several application areas worldwide.
Product Information
• Alarm contact
Your benefits
• Barrier for non-galvanic isolated equipment
ons and weight
| L x H x H (mm): | 167 x 113 x 35 mm (excluding DIN-rail and plug-able connectors) |
| Weight: | 650 g (excluding plug-able connectors, cable brackets and packing material). |
| Mounting DIN-rail type | 35mm × 7,5mm (EN 50022, BS 5584, DIN 46277-3) |
Ambient conditions
| Operating temperature range |
-25 to +70o Celsius -13 to +158o Fahrenheit |
| Isolation class | IP 20 (IEC/EN 60529, DIN 40050) |
Protocol specification
| Supported Protocols | DP-V0, DP- V1, DP-V2, FDL, MPI, FMS, PROFIsafe, PROFIdrive and any other FDL based protocol. | ||||||||||||||||||||||||||||||||||||||||
| Transmission speed | 9.6 kbps to 12 Mbps (including 45.45 kbps) | ||||||||||||||||||||||||||||||||||||||||
| Transmission speed detection | Auto detect | ||||||||||||||||||||||||||||||||||||||||
| Transmission speed detection time | < 10 s detection and 50 s baudrate switchover time. | ||||||||||||||||||||||||||||||||||||||||
| Transmission speed switch |
For older ProfiHubs refer to paragraph 2.10.1 |
||||||||||||||||||||||||||||||||||||||||
| Data delay time |
At baudrate Normal mode Robust mode 9.6 – 500 kbps 3.0 Tbit 14 Tbit 1.5 Mbps 4.0 Tbit 15 Tbit 3 Mbps 4.5 Tbit 15 Tbit 6 Mbps 5.0 Tbit 16 Tbit 12 Mbps 7.0 Tbit 18 Tbit |
||||||||||||||||||||||||||||||||||||||||
| Jitter per message frame |
0.0625 Tbit at 9.6 Kbps – 3 Mbps 0.125 Tbit at 6 Mbps 0.25 Tbit at 12 Mbps |
||||||||||||||||||||||||||||||||||||||||
| Deviation | 2 bit times (over the complete message) for received messages is allowed and is corrected to nominal speed when transmitted. |
PROFIBUS Diagnostics Device specifications
| Supported Protocol | DP-V0 |
| Ident Number | 6970 |
| GSD filename | PROC6970.gsd |
| Bus address | 0-126 (software address only, set by software, default 126) |
| Transmission speed | 9.6 kbps to 12 Mbps (including 45.45 kbps) |
| Transmission speed detection | Auto Detect |
| Maximum transferrable data | 85 bytes input and 5 bytes output |
PROFIBUS cable specifications
| Cable lengths | 1200 m at 9.6 kbps to 93.75 kbps 1000 m at 187.5 kbps 400 m at 500 kbps 200 m at 1.5 Mbps 100 m at 3 Mbps to 12 Mbps |
| Cable thickness | 10 mm (when the ground rail is used) |
| Wire diameter (for the screw terminals) | < 2.5 mm2 |
| Wire type | Stranded or solid core |
| Number of devices | Maximum 31 per Channel (including ProfiHubs, OLMs, Laptops/PCs, etc.) |
| Termination |
Integrated and switchable. Powered according to IEC 61158 (390/220/390 Ohms) – All Channels (default on) – Main-Channel (default off) |
| Redundancy | Yes (Channel 4 and 5) |
| Cascading depth | No limit (only limited by bus parameter of the master) |
| Cascading units |
With standard bus parameters: 9.6 kbps 6 6 1 19.2 kbps 6 6 1 45.45 kbps 39 39 8 93.75 kbps 6 6 1 187.5 kbps 6 6 1 500 kbps 16 16 3 1.5 Mbps 20 20 5 3 Mbps 17 17 5 6 Mbps 13 13 4 12 Mbps 13 13 5 |
Power supply specifications
| Power supply operating voltage | 12 to 24 VDC |
| Power supply absolute max rated voltage | 9 to 31 VDC |
| Redundant power supply | Yes |
| Current consumption | 275 mA at 24 V power supply (all Channels fully loaded) |
| Power dissipation | Max. 2.8 W |
| Reverse polarity protection | Yes |
| Wire diameter | < 2.5 mm2 |
Alarm contact
| Voltage | Max. 24 VDC |
| Current | Max. 0.5 A |
Connector Lay-out
| 2x Power supply POW 1 and POW 2 |
Plug-able screw connector, pitch 5,08 mm Pin + : 12 to 24 VDC Pin – : 0 V Screw: Shield |
| Alarm Contact |
Plug-able screw connector, pitch 5,08 mm Pin 1: relay contact (potential-free) |
| PROFIBUS screw terminals Main Channel and Channel 1 to 5 |
Plug-able screw terminal, pitch 3,81 mm Pin A: PROFIBUS A (green wire) Pin B: PROFIBUS B (red wire) Pin I : Indirect shield |
| PROFIBUS DB9 Main Channel and Channel 1 to 5 |
D Sub connector, 9 contacts (PROFIBUS specification) Pin 1: N.C. Shield is connected internally to the DIN-rail Pin I is connected internally with 10nF/1MOhm to shield. |
Standard and approvals
| CE |
EMC Directive 2014/30/EU, class B Digital Device RoHS Directive 2011/65/EU |
| FCC | 47 CFR 15, Unintentional Radiator, class B Digital Device. |
| UL |
Report reference: E365044-A1-UL Standards for safety: UL 60950-1, Information Technology Equipment – Safety – Part 1 General Requirements CAN/CSA C22.2 No. 60950-1-07, Information Technology Equipment – Safety – Part 1: General Requirements |
| DNV |
Certificate number: A-13659 Location classes:
|
| MTBF | 398723 hours according to IEC-62380 (RDF2000/UTE C 80-180) |
| Order Codes | 17020R |
| Included Components | Anybus ProfiHub B5+ |
| Warranty | 1 year |
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.
Our expertise lies in establishing, maintaining, and leveraging plant data for business benefit. Through our innovative solutions, we work alongside you to streamline processes, enhance efficiency, and reduce costly downtime.
Copyright @2024 Industrial Data Xchange.
All rights reserved.
CONTACT US
Main: +27 (11) 548 9960
Sales: +27 (11) 548 9970
SOCIAL MEDIA