A passive diagnostics solution that can be used around the clock
The EtherTAP2 is a monitoring interface that enables the in-depth analysis of PROFINET and EtherNet/IP traffic. Just like its highly popular predecessor, it acts as a bridge between your industrial network and the Anybus Osiris diagnostics platform.
However, its newly designed housing and improved functionality guarantee the early detection of communication errors and give round-the-clock access to passive diagnostics.
Upgrading the EtherTAP’s housing – which is based on the Atlas2 Plus – has turned this handy plug-and-play solution into an effective permanent monitoring solution. First, it’s designed to be permanently installed on a DIN rail. It now fits neatly side-by-side with your Atlas2 Plus. Second, it improves heat dissipation in the cabinet, reducing the risk of overheating and boosting efficiency.
Product Information
Dimensions
| W x D x H (mm): | 52 x 130 x 120 (DIN-Rail clip included; plug-able connectors as amounted in installations excluded) |
| Weight: | 465 grams (excluding plug-able connectors, and packing material) |
| DIN-rail: | 35 x 7.5 mm (IEC/EN 60715) |
Ambient conditions
| Operating temperature range | -20° to +60° Celsius |
| Storage and shipping temperature | -20° to +85° Celsius |
| Relative air humidity | Max. 98%, non-condensing |
| Ingress protection | IP 20 (IEC/EN 60529, DIN 40 050) |
Power supply
| Maximum power use | Max. 3 W |
| Powered from a USB port |
Yes Connect power supply POW1 and/or POW2 if the USB power supply is not sufficient. Disconnecting the USB 3.0 cable also interrupts the connected Ethernet cables for 1-2 seconds. |
| Nominal power supply USB | 5 VDC |
| Current consumption Secondary @5 VDC |
Max. 520 mA at 10 Mbps (Full Traffic) Max. 450 mA at 100 Mbps (Full Traffic) Max. 600 mA at 1000 Mbps (Full Traffic) |
| Nominal power supply POWER 1-2 | 12 to 24 VDC |
| Current consumption POWER 1-2 @12 VDC |
Max. 220 mA at 10 Mpbs (Full Traffic) Max. 190 mA at 100 Mbps (Full Traffic) Max. 250 mA at 1000 Mbps (Full Traffic) |
| Reverse polarity protection | Yes |
| Pluggable power supply connector |
Pin – : 0 V Pin +: 12 to 24 VDC Pin SH: Shield |
| Wire diameter | Max. AWG 14 (max area 2.5 mm2) |
| Installation notes: |
The device shall be powered with the correct power supply:
Possible power supplies: |
Ethernet
| Connector ETH1 and ETH2 | RJ-45 |
| Maximum cable length | 100 m |
| Link speed | 1 Gbit |
| Network Link | Galvanically separated |
| Network Latency |
10 Mbps: max. 7600 ± 25 ns 100 Mbps: max. 720 ± 24 ns 1000 Mbps: max. 380 ± 8 ns |
USB Ports
| Port type | USB3.0; Port type B |
LEDs
| Power LED (1) | On: Power Ok |
| USB LED (2) |
Off: No USB cable connected On: USB cable and USB power connected Blinking: Constant synchronisation between system time and hardware timestamp. |
| Link/Activity LEDs (3,4) |
On: The Ethernet Port is linked Blinking: The port is linked and has RX/TX activity (traffic is passing through). |
|
Speed LEDs (5,6)
|
LED5 On: Operating at 100 Mbps. LED6 On: Operating at 10 Mbps. LED5,6 On: Operating at 1000 Mbps. LED5,6 Blinking: EtherTAP is not connected or trying to connect. LED5,6 Alternate Blinking: EtherTAP cannot find a common speed between the connected devices. |
System requirements
| System type and Operating system | Atlas, Atlas2 Plus; Linux PC: Dual Core Processor, 4 GB memory, USB3.0 port; Windows 7/8/10 (32-bit & 64-bit) |
Standards and Approvals
| CE |
EMC Directive 2014/30/EU, class A RoHS Directive 2011/65/EU Emission: CISPR32 Immunity: CISPR35 |
| FCC | 47 CFR 15 & ICES-003 (Issue 6), class A |
| Order Codes | 513-20021A |
| Included Components |
Anybus EtherTAP2: 1G Supplied with manual, drivers, 1 x 1m RJ/45, 1 x 1 USB
|
| Additional Information | Works with EtherTAP: PROFINET Analysis License (101-700204), Wireshark, ClearSight, OptiView, NetSpector, OmniPeak, NetDecoder, Packetyzer, Ethertest. |
| Warranty | 1 year |
Book your product
We are fully committed to providing our customers with the very best products and customer service. We believe in going the extra mile to ensure that each customer is satisfied with our products and solutions. We have the experience and the reputation in the field to deliver the products customers need to expedite their projects and assure quality every step of the way.
Our expertise lies in establishing, maintaining, and leveraging plant data for business benefit. Through our innovative solutions, we work alongside you to streamline processes, enhance efficiency, and reduce costly downtime.
CONTACT US
Main: +27 (11) 548 9960
Sales: +27 (11) 548 9970
SOCIAL MEDIA
Copyright @2024 Industrial Data Xchange. All rights reserved.